Making home brew beer in your own kitchen with a home made fly sparge system for more brew house efficiency at home..
The Pump is a 12v submersible aquarium circulator from Amazon.
2m of 8mm x 10mm silicon tube:
Materials needed:
If soldering isn’t your thing you can use pre soldered (Yorkshire style) fittings or the push fit type.
2 m 15mm tube
2x 15mm Ts
4x 15mm elbows
2x 15x10mm reducers
1 m of 10mm tube
(but if you get a small coil of 10 mm tube it will be handy for making a cooling coil. I will be talking about that in a future video)